Golf Information 4 U DirectoryYou are here » Golf Information 4 U » Links Directory » Health » Hygiene (0)
Hygiene RSS FeedsThe Flowers That Bloom In The Spring - Tra-la! At last the crocuses have bloomed.There is something about the first flower of spring that changes everything. It signals, to me at least, the beginning of the gardening season.I've been pulling up weeds from the rose beds for a few weeks now. For the most part, the roses themselves seem to have handled the winter well. Rosa multiflora already has leaves. Rosa akransana and Rosa woodsii ultramontana are budding out; the latter of which (which normally do <br /><a href="http://www.wunderground.com/blog/fa/comment.html?entrynum=4">Read More</a>...Feed Source: www.wunderground.com Systematic Review of Respiratory Outbreaks Associated with Exposure to Water-Based Metalworking Fluids -
Introduction:
Potential demographic risk factors for outbreaks of respiratory disease due to water-based metalworking fluids (MWFs) were investigated through systematic review of published outbreak investigations.
Methods:
Search terms were selected by a multidisciplinary team, assisted by an experienced library information service. Several computerized literature databases were searched for articles published between January 1990 and October 2011, relating to ill health outbreaks due to MWFs. Papers meeting the search criteria were reviewed in detail, and their references checked for additional articles. Study design and demographic details of the outbreak were extracted from the selected articles and entered into standardized evidence tables.
Results:
Thirty-five articles relating to investigations of 27 outbreaks of respiratory ill health attributed to MWF exposure were identified. The majority of reports were... The Diesel Exhaust in Miners Study: V. Evaluation of the Exposure Assessment Methods -
Exposure to respirable elemental carbon (REC), a component of diesel exhaust (DE), was assessed for an epidemiologic study investigating the association between DE and mortality, particularly from lung cancer, among miners at eight mining facilities from the date of dieselization (1947–1967) through 1997. To provide insight into the quality of the estimates for use in the epidemiologic analyses, several approaches were taken to evaluate the exposure assessment process and the quality of the estimates. An analysis of variance was conducted to evaluate the variability of 1998–2001 REC measurements within and between exposure groups of underground jobs. Estimates for the surface exposure groups were evaluated to determine if the arithmetic means (AMs) of the REC measurements increased with increased proximity to, or use of, diesel-powered equipment, which was the basis on which the surface groups were formed. Estimates of carbon monoxide (CO) (another component of DE) air ... A Comparative Field Study on Dust Measurements by Different Sampling Methods with Emphasis on Estimating Factors for Recalculation from Chinese 'Total Dust' Measurements to Respirable Dust Concentrations -
In China, dust samplers were originally designed to collect ‘total dust’ for a short term during production, which is different from the widely adopted sampling strategy for dust. With the aim to provide the conversion factor from Chinese total dust to US and German respirable dust and to look at the influences on conversion factors from environment, production, and instruments, a comparative field study on the dust concentration measurements by different sampling methods was carried out in the same Chinese industries as in the 1989–1990 study and in some other factories. A supplemental experiment was also conducted in a wind tunnel. Dust concentration was measured with a parallel sampling strategy by using the following samplers: 10-mm nylon cyclone for US respirable dust (AR), FSP-Berufsgenossenschaftliches Institut für Arbeitssicherheit (BIA) cyclone for German respirable dust (GR), and samplers for Chinese total dust (CT). Totally, 1434 samples were colle... Quartz Measurement in Coal Dust with High-Flow Rate Samplers: Laboratory Study -
A laboratory study was performed to measure quartz in coal dust using high-flow rate samplers (CIP10-R, GK2.69 cyclone, and FSP10 cyclone) and low-flow rate samplers [10-mm nylon and Higgins–Dewell type (BGI4L) cyclones] and to determine whether an increased mass collection from high-flow rate samplers would affect the subsequent quartz measurement by Fourier transform infrared (FTIR) and X-ray diffraction (XRD) analytical procedures. Two different sizes of coal dusts, mass median aerodynamic diameter 4.48 μm (Coal Dust A) and 2.33 μm (Coal Dust B), were aerosolized in a calm air chamber. The mass of coal dust collected by the samplers was measured gravimetrically, while the mass of quartz collected by the samplers was determined by FTIR (NIOSH Manual of Analytical Method 7603) and XRD (NIOSH Manual of Analytical Method 7500) after one of two different indirect preparations. Comparisons between high-flow rate samplers and low-flow rate samplers were made by calculating ... Use of the MEGA Exposure Database for the Validation of the Stoffenmanager Model -
Objectives:
This paper explores the usefulness of the exposure database MEGA for model validation and evaluates the capability of two Stoffenmanager model equations (i.e. handling of powders/granules and machining) to estimate workers exposure to inhalable dust.
Methods:
For the task groups, ‘handling of powders and granules’ (handling) and ‘machining of wood and stone’ (machining) measurements were selected from MEGA and grouped in scenarios depending on task, product, and control measures. The predictive capability of the model was tested by calculating the relative bias of the single measurements and the correlation between geometric means (GMs) for scenarios. The conservatism of the model was evaluated by checking if the percentage of measurement values above the 90th percentile estimate was ≤10%.
Results:
From 22 596 personal measurements on inhalable dust within MEGA, 390 could be... Potentially Pathogenic Bacteria and Antimicrobial Resistance in Bioaerosols from Cage-Housed and Floor-Housed Poultry Operations -
Background:
Antibiotics are used in animal confinement buildings, such as cage-housed (CH) and floor-housed (FH) poultry operations, to lower the likeliness of disease transmission. In FH facilities, antibiotics may also be used at sub-therapeutic levels for growth promotion. Low levels of antibiotic create a selective pressure toward antimicrobial resistance (AMR) in chicken fecal bacteria.
Objective:
The objective of this study was to compare bacteria and AMR genes in bioaerosols from CH and FH poultry facilities.
Methods:
Bioaerosols were collected from 15 CH and 15 FH poultry operations, using stationary area samplers as well as personal sampling devices. Bacteria concentrations were determined by genus- or species-specific quantitative polymerase chain reaction (PCR) and AMR genes were detected using endpoint PCR.
Results:
Enterococcus spp., Escherichia coli, ... Tensile Properties and Integrity of Clean Room and Low-Modulus Disposable Nitrile Gloves: A Comparison of Two Dissimilar Glove Types -
Background:
The selection of disposable nitrile exam gloves is complicated by (i) the availability of several types or formulations, (ii) product variability, and (iii) an inability of common quality control tests to detect small holes in the fingers. Differences in polymer formulation (e.g. filler and plasticizer/oil content) and tensile properties are expected to account for much of the observed variability in performance.
Objectives:
This study evaluated the tensile properties and integrity (leak failure rates) of two glove choices assumed to contain different amounts of plasticizers/oils. The primary aims were to determine if the tensile properties and integrity differed and if associations existed among these factors. Additional physical and chemical properties were evaluated.
Methods:
Six clean room and five low-modulus products were evaluated using the American Society for Testing and Materials Method D412... Triaging Jobs in a Community-Based Case-Control Study to Increase Efficiency of the Expert Occupational Assessment Method -
Objectives:
Expert assessment is useful to assess occupational exposures in cases where measured exposure data are not available. However, the process may be inefficient in a community-based study with low prevalence of exposure. This study aimed to determine if formally triaging the jobs as to likelihood of exposure before the experts review those jobs could improve study efficiency.
Methods:
One thousand nine hundred and sixty-one jobs from a case–control study were triaged by study staff (non-occupational health professionals) into four groups depending on the likelihood of exposure to solvents. For jobs in one group, we had additional information available in the form of job-specific modules and automatic exposure assignments for solvents based on rules pre-programmed into the job-specific module. After the automatic assignment, two experts reviewed the jobs to assign exposure to solvents in order to evaluate the process. The prev... MDHS 25 Revisited: Part 2, Modified Sampling and Analytical Procedures Applied to HDI-Based Isocyanates -
The method that is probably the most commonly used worldwide for the determination of total organic isocyanates (NCO) in air is the Health and Safety Executive method, MDHS 25/3, Organic Isocyanates in Air, and its variants. This paper summarizes some of the research and development work carried out by Health and Safety Laboratory on this method since its publication in 1999 with the eventual aim of incorporating this work in an updated version of MDHS 25 (i.e. MDHS 25/4). The work falls into two main areas: use of liquid chromatography/mass spectrometry (LC/MS) as an alternative to liquid chromatography with electrochemical and ultraviolet/visible detection (LC/EC/UV) and evaluation of ‘solid-phase’ sampling techniques as an alternative to the impinger–filter combination stated in MDHS 25/3. This paper deals primarily with HDI-based NCO but some comments regarding aromatic NCO (MDI and TDI) are included for completeness. An LC/MS/MS version of MDHS 25/3 has been ... The Effect of Two Sock Fabrics on Perception and Physiological Parameters Associated with Blister Incidence: A Field Study -
The goal of the present study was to investigate differences in perception and skin hydration at the foot of two sock fabrics with distinct moisture properties in a realistic military setting. Thirty-seven military recruits wore two different socks (PP: 99.6% polypropylene and 0.4% elastane, and BLEND: 50% Merino-wool, 33% polypropylene, and 17% polyamide), one on each foot. Measurements were carried out after a daily 6.5-km march on 4 days. Each participant rated temperature, dampness, friction, and comfort for each foot. On a daily selection of participants, skin hydration was measured on three sites of both feet using a corneometer, and moisture content of the socks was determined. BLEND was rated to be cooler, less damp, and more comfortable (P < 0.05). Two out of three skin sites were drier for BLEND than PP (P < 0.05). Moreover, BLEND stored 2.9 ± 0.3 times more moisture compared to PP. Thus, under the present conditions, socks such as BLEND are to ... Copyright © 2012, Golf Information 4 U. All Rights Reserved. |